SKU CO-9050003-WW
Air Series™ AF120 Performance Edition High Airflow 120mm Fan

£14.99 GBP

The Air Series AF120 fans let you have it all. Nine ultra-thin, custom-molded blades push ample air volume. Rubber corners dramatically reduce vibration.

Fan Size
Package Quantity
OUT OF STOCK

High Airflow for Efficient Large-Volume Cooling

Air Series AF case fans perform best in unrestricted spaces with at least 3 cm (1.2”) of clearance, and they’re ideal for mounting at the rear or top of your PC case as exhaust fans for your PC’s motherboard and CPU, graphics accelerators, and other components that fill the case with heat. They work equally well as unrestricted intake fans for areas like side panels or bottom intakes.

For high restriction areas like hard drive cages or in other tight spaces where there’s less air volume, check out our Air Series SP models of high static pressure fans.

Performance

AF120 Performance Edition AF120 Quiet Edition
Size 120mm x 25mm 120mm x 25mm
Operating Voltage 7V - 12V 7V - 12V
Performance at 12V Performance at 12V
Airflow 63.47 CFM 39.88 CFM
Static Pressure 1.1 mmH20 .5 mmH20
Sound Level 30 dBA 21 dBA
Speed 1650 RPM 1100 RPM
Power Draw 0.13 A 0.08 A

CONTENTS AND SPECIFICATIONS



  • Package Contents

  • x1 AF120 Performance Edition Fan
  • Three colored rings in red, blue, and white
  • Mounting Screws
  • Voltage step-down adapter for lower speed operation

Fan Warranty
Two years
Fan Size
120mm x 25mm
Bearing Type
Sleeve
Fan Type
Performance Edition
Flow Type
Airflow
LED Color
None
Operating Voltage
7V - 12V
PWM Control
NO
CORSAIR iCUE Compatibility
NO
Fan Model
AF Series
Package Quantity
Single Fan
Speed
1650 RPM
Sound Level
30 dBA
Power Draw
0.13 A
Static Pressure
1.1 mmH20
Fan Airflow
63.47 CFM
LOAD MORE

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�