By Dustin Sklavos
Extreme CPU cooling performance for 280mm radiator mounts
Hydro Series H110 is an all-in-one liquid CPU cooler that provides cooling that’s far superior to stock CPU air fans. Liquid cooling simply works better than air cooling, and the self-contained design of the H110 makes it easy for you to protect your valuable CPU.
Take advantage of your 280mm radiator mount
For efficient cooling, bigger is better – it’s simple physics. If your PC’s case can fit a 280mm radiator, Hydro Series H110 will give you better performance. The larger diameter fans provide better airflow with lower noise than most 120mm fans, and the 280mm radiator has more surface area for faster cooling.
LOW-RPM 140MM FANS
The blades of the included 140mms fan are larger than most 120mm fan blades, so they don’t need to spin as fast to deliver the same airflow, reducing noise without lowering performance.
The low-evaporation, easy-bend tubing is guaranteed leak-free.
Advanced cold plate and manifold design
The cold plate uses copper for outstanding heat transfer, and the manifold is engineered for efficient flow.
Simple mounting bracket
The multi-platform mounting bracket easily adapts for Intel and AMD processors.
- Intel 115x, Intel 2011/2066
- AMD AM3/AM2
- Radiator Dimensions: 140mm x 312mm x 29mm
- Fan Dimensions: 140mm x 25mm
- Fan Speed: 1500 RPM
- Fan Airflow: 94 CFM
- Noise Level: 35 dBA
- Fan Static Pressure: 1.64 mm-H2O
Hydro H110 Spare Parts List
Hydro Series H90/H110 140MM Single Replacement Fans
Hydro Series H40/H50/H55/H70/H90/H110 AMD Mounting Bracket Kit
Hydro Series H40/H50/H55/H70/H90/H110 Intel Mounting Bracket Kit
Socket 2011 Hydro Series CPU Cooler Mounting Guide
The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair
Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.
Hydro Series H80 and H100
Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.
Install all four of the standoffs as shown below.
After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.
Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.
Hydro Series H70 Core
The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.
The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.
Corsair Airflow Pro Installation Guide
We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�
How to install CORSAIR AMD Bracket
By Dustin Sklavos
By Dustin Sklavos
By Pure Overclock
Posted on January 28, 2013
Hydro Series H110 wins Madshrimps Performance award
If your case can house it, the Hydro 110, CORSAIR's new flagship, is the ultimate All in One Cooling kit tested till date by the Madshrimps crew.Full Review!
By Hitech Legion
Posted on January 31, 2013
Hydro Series H110 wins Gold award from OC3D!
“The big daddy gold award goes to the NZXT Kraken X60 and Corsair H110 in main part for the awesome temperatures. They are both a little rough around the edges and I think they both have areas in which they can make them better all round performers.”Full Review!
By Hardware Heaven
Posted on April 5, 2013
Hydro H110 wins Hardware Heaven Recommended award!
“So how did we feel about the cooler overall? Well on the performance front it is an impressive device. Class leading thermal performance is backed by low noise operation, which is always a great mix.”Full Review!
Posted on April 2, 2013
The Hydro H110 wins the Guru3D Top Pick award!
“The overall performance we think is terrific, and combined with the extremely low noise levels the H110 gets my approval real fast.”
“Leaving the bling out of this kit keeps it quite affordable, and as such comes recommended by Guru3D.com with a Top Pick award.”
“You know, we recently tested the NZXT Kraken series which in essence is a product close to the Corsair H110. Both originate from the very same ODM, albeit with different preferences and specs. The basis (radiator/cooling-block) however is from the same DNA. So it's not a surprise to see the two similar sized products perform very close to each other. My preference however goes to Corsair for the simple fact that is it the most silent product.”Full Review!