SKU CSSD-F240GBGS-BK
Force Series™ GS 240GB SATA 3 6Gb/s Solid-State Hard Drive

£169.99 GBP

Force Series™ GS Solid-State Drives: Speed for the real world.Force Series™ GS solid-state drives are powered by a SandForce SF-2200 SSD Processor and fast Toggle NAND memory for both fast sequential read/write speeds and strong random write speed for impressive real-world performance.

OUT OF STOCK

Force Series GS Solid-State Drives: Speed for the real world.

Force Series GS solid-state drives are powered by a SandForce SF-2200 SSD Processor and fast Toggle NAND memory for both fast sequential read/write speeds and strong random write speed for impressive real-world performance.

Fast in a straight line. Fast in the curves, too.

Many SSDs achieve quick load times with files that can be compressed and decompressed at the read/write stage, but slow down significantly reading data that's already compressed. Neutron goes one better by offering impressive performance even with compressed and non-compressible data.

Works even better with the latest systems

Force Series GS supports SATA 3 6Gb/s, so you’ll get superior performance from newer notebook and desktop PCs that use the newest standard. It’s also fully backward compatible with SATA 2.

Superior sequential read and write speeds

The first key to real performance is sequential read and write speeds.  You’ll feel the speed when you’re loading and saving large files. Solid-state drives store files in contiguous blocks of memory, so you’ll get nearly instantaneous response when you click that “Load” or “Save” button.

Excellent random write performance

Fast random write speeds are also critical to performance you’ll notice on a daily basis. If you’re running multiple applications at once, odds are that they’re writing small bits of data to the drive with regularity. The fast Toggle NAND memory gives Force Series GS the agility to handle them all without slowing down.

Features

Cool and quiet, with low power consumption

Traditional mechanical hard drives spin at thousands of revolutions per minute. This takes power, and generates noise and heat. Since SSDs have no moving parts, there's no noise or vibration, and the lower power consumption helps keep things cool inside your PC. It can also save battery life on notebooks.

Maintains its performance over time

Force Series GS solid-state drives support the Windows 7 TRIM command. This allows them to store only the data they need and perform memory optimization to ensure the fastest possible write speeds.

Solid-State reliability

Because SSDs have no moving parts, they can handle shock, vibration and temperature changes far in excess of traditional hard drives. That's important for desktop PCs, and essential for notebooks.

COMPATIBILITY



  • SATA 6GB/s
  • Backward compatible with SATA II and SATA I
  • Microsoft® Windows® 7, Vista®, and XP®, Macintosh OS X®, Linux
  • 2.5" or 3.5" hard drive bay

Technical Specifications

  • SSD Shock: 1500 G
  • SSD Interface: SATA 6Gb/s
  • Power Consumption active: 4.6W Max
  • Power Consumption Inactive: 0.6W Max
  • SSD Sequential Read Write: Up to 555 MB/s read — 525 MB/s write
  • Form Factor: 2.5 inch
SSD Unformatted Capacity
240 GB
SSD Smart Support
Yes
Weight
80g
SSD Interface
SATA 6Gb/s
Power Consumption active
4.6W Max
Power Consumption Inactive
0.6W Max
SSD Sequential Read Write
Up to 555 MB/s read — 525 MB/s write
Form Factor
2.5 inch
NAND Technology
MLC
Voltage
5V ±5%
SSD Shock
1500 G

Corsair SSDs with Zero Overprovisioning Space

Much has been written about overprovisioning and its implementation on SSDs. In short, overprovisioning, or OP, is a portion of storage space on an SSD that is reserved for use only by the SSD controller. The three most common uses for this space are wear leveling, the replacement of bad blocks, and read-modify-writes. Overprovisioning serves to help increase both the longevity and performance of SSDs and it is a very common practice among SSD manufacturers.

However, some users would like to be able to buy their SSDs without the built in overprovisioning and make the decision to OP, or not to OP for themselves. They prefer the flexibility of deciding for themselves when to OP and how much space to use based on their specific needs. Corsair has announced and is now offering SSDs without this overprovisioned space.



Corsair SSDs with overprovisioning space typically have used 7% of the total SSD storage capacity. This means that users now have a choice with these new drives to use them with or without overprovisioning. Users can manually overprovision the drives if they wish or, they can leave them at their full capacity with no overprovisioning and enjoy the extra space.

For users of 256GB SSDs, this means they can have an extra 16GB of storage capacity on their drive over the equivalent 240GB overprovisioned SSD. Of course, RAID users will benefit even more as the number of drives is increased.

In reading some of that aforementioned information about overprovisioning, I've found a great deal of very useful information over at Anandtech. Here's a diagram from one of Anand's SSD articles highlighting how overprovisioning works.

Corsair SSDs with Zero Overprovisioning Space



Our initial offerings in the non-OP drive arena are in the Force Series GS and the Neutron Series with more to come. For more information on our SSD lineup, please visit our Corsair website SSD page.

To OP, or not to OP. That is the question. Whether tis nobler to the PC performance...

 

Corsair SSD Toolbox

Corsair proudly brings you the Corsair SSD Toolbox. This helpful utility provides users with several powerful and useful tools for use with Corsair SSDs. Let's take a look. Download the Corsair SSD Toolbox HERE. 

The Corsair SSD Toolbox will run on:

  • XP SP3 (32-bit)...(64-bit version not supported)
  • Vista 32-bit w/ latest SP (all functions)
  • Vista 64-bit w/ latest SP (all functions)
  • Win 7 32-bit w/ latest SP (all functions)
  • Win 7 64-bit w/ latest SP (all functions)
  • Win 8 32-bit (TRIM is not supported, all others functions are)
  • Win 8 64-bit (TRIM is not supported, all others functions are)

We have provided a detailed help file which can be accessed by clicking on the question mark symbol shown here circled in red on the upper left side of the screen.

Corsair SSD Toolbox

This help file gives detailed information on each function of the SSD toolbox. Clicking the question mark will open the help file in a browser.


Your main screen at launch shows the drive information of single drives attached to the system. Other drives will appear in the drive information window but core functionality is restricted to authorized Corsair SSDs. RAID volumes will not be seen as single drives as the tool cannot address them individually. The "i" symbol will show you the toolbox version number and license agreement. The circular arrows will refresh the tool.

Corsair SSD Toolbox

Individual drive information is shown in the center of the main window. When your SSD controller is in AHCI mode, you can update your SSD firmware from this page using the button circled in red below. The firmware update requires AHCI mode. AMD/nVidia chipset systems may require different storage drivers for proper operation. USB connected SSD drives must use SAT-capable cables/enclosures that support ATA/SAT-pass-through.

Corsair SSD Toolbox


After you select firmware update the tool will scan your drive and check for firmware updates. If there is an update available, the dialogue will prompt you to update the firmware or cancel the operation.

Note: Firmware updates can only be executed when the SSD controller is in AHCI mode. Firmware updating via this toolbox is enabled for The Corsair Series Force 3, Force Series GT, Force Series GS, Neutron Series, and Neutron Series GTX SSDs. Earlier and EOL Corsair drives with firmware updates can be updated manually using the tools supplied on our website.


The next screen will prompt you to backup your data before updating your firmware. The updates are intended to be non-destructive but we strongly encourage users to back up any critical data before performance a firmware update. If you wish to continue, press Apply.

Corsair SSD Toolbox

Once your drive is updated, close the toolbox window using the close button.

Corsair SSD Toolbox


Note: Corsair recommends that users update their OS drive as attached storage when possible. Some systems will require the SSD to be disconnected briefly before the new firmware version will appear in the Drive Information window.

Additional functions can be activated with the column of buttons down the left side of the toolbox. Corsair is now producing SSDs that do not have factory overprovisioning. For users that desire to manually overprovision their drives, we have provided a function for this. Overprovisioning your drive can contribute to maintaining better performance and adding longevity to your SSD.

Corsair SSD Toolbox

Users desiring to monitor the S.M.A.R.T status on their drives can do so using the S.M.A.R.T. button. Find more details on Self-Monitoring, Analysis and Reporting Technology here.

Corsair SSD Toolbox

We have a disk cloning feature under development. At the time of this article, this feature is not complete but it is expected along very soon. For now as you can see, it's under construction. This feature will allow users to easily clone to and from their Corsair SSDs.


Users have asked for a feature to allow them to manually send a TRIM command to their drives and to also schedule a TRIM operation so that they can optimize their SSD's performance.



Corsair SSD Toolbox

SSD users also occasionally have need to perform a secure erase operation. The tool allows for this in one easy step.


The Corsair SSD Toolbox is extremely useful and versatile. We're confident that our customers will find it very useful and see it as an added value to a superb Corsair SSD.

By Guru3D

Posted on  July 25, 2012

Guru3D Recommends the Corsair Force GS 240GB SSD

"Corsair definitely did it right, perhaps a future firmware can further optimize the sequential write performance a little -- then it could make this the #1 SSD to get. Corsair will cover this product with a three year warranty. Let me wrap it up, I have every confidence in the stability and extreme performance of the SF2281 Force GS based products, and as such I wouldn't hesitate using an SSD like shown today. The Force GS series as such come really recommended for the real storage performance mongers amongst you."

Full Review!

By Muropaketti

Posted on  July 24, 2012

Corsair Force GS 240GB SSD scores 4.5/5 and wins the Editor's Choice award at TechPoawerUp

"Corsair's Force GS 240 GB is a great and well-performing solid state drive. It is built on the popular SandForce SF-2281 controller, paired with fast Toggle Mode flash chips, which are a first for Corsair. Corsair has promised improved performance, especially faster write speeds, but our real-world benchmarks showed very little difference. The drive performs at the same level as the OCZ Vertex 3 and Kingston HyperX, which both use a SandForce controller with Intel flash. Nevertheless, overall performance is outstanding and leads our performance charts; only Corsair's Marvell-based Performance Pro is 3% faster."

Full Review!

By Bit-Tech

Posted on  November 19, 2012

Corsair Force GS 240GB wins 'Good Product' Award from Sweclockers.com!

"Overall, Force GS a very good unit, and one of the fastest SandForce models on the market."

Full Review!

By ThinkComputers

Posted on  July 25, 2012

Corsair Force GS 240 SSD wins the "Gold" award at Vortez.net

"The Force GS Series is without doubt one of the best SandForce driven SSDs out there. It pushes the boundaries for performance, is very sturdy, comes with 3 years peace of mind warranty and looks quite funky too. Due to all of these aspects the Force GS Series deserves nothing less than our Gold award for excellence."

Full Review!

By TweakTown

Posted on  January 8, 2012

Corsair Force GS 240GB SSD scores 4/5 and gets the "Performance" award at Hexus.net

"Bottom line: Similar solutions have been available for some time, but that takes nothing away from the fact that Corsair's Force Series GS is one of the best-performing SandForce drives on the market."

Full Review!

Force Series GS solid-state drive
3.5" adapter for desktop PCs