SABRE v2 PRO WIRELESS CF

Connect the mouse to an available USB 2.0 or 3.X port on your PC with the USB CHARGING / DATA CABLE (L).

The lights under the MIDDLE CLICK / SCROLL WHEEL (C) on the mouse will light up according to the battery status and will turn solid green when charging is complete.

• Connect the USB WIRELESS RECEIVER (K) to the USB CHARGING / DATA CABLE (L), plug the other side of the cable to an available USB 2.0 or 3.x port located on the front panel of your PC or nearby USB port.
• Power on your mouse by switching the POWER / WIRELESS MODE SWITCH (I) to 2.4GHz wireless.
• The LED indicator under the MIDDLE CLICK / SCROLL WHEEL (C) will turn solid green when successfully connected to the receiver.

Bluetooth wireless is best for everyday computing tasks, productivity, and office applications.

• Initiate Bluetooth pairing on your Bluetooth 4.0 or higher enabled device.
• Power on your mouse by switching the POWER / WIRELESS MODE SWITCH (I) to Bluetooth.
• The LED indicator under the MIDDLE CLICK / SCROLL WHEEL (C) will blink blue and turn solid blue when connected.
• If the BT pairing device needs to be re-paired or changed, switch the BT mode first. Hold down the DPI & Bluetooth Pairing Button (J) for 3 seconds or until the LED indicator starts blinking blue to enter BT pairing mode.

*SABRE v2 PRO WIRELESS CF can only be paired to one device. If you need to pair with another device, please enter re-pairing mode to initialize the pairing process.

DPI cycling is available for fast configuration.

• Press the DPI & BLUETOOTH PAIRING BUTTON (J) once to switch to next DPI stage.
• When switching to the corresponding DPI level, the indicator light on the mouse wheel will flash 3 times for the corresponding DPI color and then turn off.
• Repeat the above steps to switch to the next DPI stage. It will cycle through 5 DPI stages and return to Stage 1.

Advanced configurations are available via CORSAIR WEB HUB.

Step 1 – Connect Your SABRE v2

A. Plug in the SABRE v2 PRO WIRELESS CF’s receiver via Type-C.
B. Make sure the power switch on the mouse is set to 2.4 GHz.

Step 2 – Open CORSAIR WEB HUB and Select the Mouse

A. Go to https://www.corsair.com/web-hub/index.html.
B. Click [Authorize].
C. Choose SABRE v2 PRO WIRELESS CF receiver.

Step 3 – Create or Select a Profile

A. At the top-left, open the profile dropdown Menu.
B. Click the profile you want to edit (for example: “Profile 1”).
C. This profile will store your DPI, and button assignments.

Step 4 – Set DPI Levels

A. Click [DPI] in the left sidebar.
B. Choose how many DPI stages you want(1~5).
C. Enable the DPI stages you want to use (for example, 800 / 1200 / 1600).

Recommended starting DPI:
- Desktop/general: 1200–1600 DPI
- FPS games: 800–1200 DPI
- MOBA/MMO: 1600–2400 DPI.

Step 5 – Remap Buttons (Actions / Key Assignments)

A. Click [Key Assignments] in the left sidebar.
B. Click the button on the mouse diagram you want to change.
C. Choose the Assignment Type:

• Keyboard (remap to a key like R, E, or P)
• Macro (record multiple keystrokes)
• etc.

D. Confirm the assignment and test it.

Step 6 – Set Macro Manager

A. Click [Macro manager] in the left sidebar.
B. Click [ + ] to add a new Macro (For example: “Profile 1”).
C. Click [Record Macro] on the right.
D. Press the keyboard keys or mouse events you want to record.
E. Click [Record Macro] again to stop recording.

Step 7 – Insert Macro events manually

A. Click [Macro manager] in the left sidebar.
B. Choose the Macro you want to edit.
C. At the insert event bar, choose whether you want to insert keyboard or mouse events with the first dropdown menu.
D. Choose the event you want to insert with the second dropdown menu.
E. Click [Insert].

Step 9 – Update firmware

A. Click [Device Setting] at bottom left.
B. Click [Check for Updates] to ensure you are running the latest device firmware.
C. Follow the steps to update the firmware if needed.

Step 10 – Pair wireless receiver

A. Click [Device Setting] at bottom left.
B. Click [Pair].
C. Follow the steps to pair the USB receiver.

This product uses a rechargeable battery and safety guidelines must be followed in the event that the product is disabled for disposal and recycling. To safely remove the battery for disposal and recycling, follow the numbered steps with the below diagrams.

1. Remove feet x2
2. Remove screws x4
3. Disassemble top case sub assy
4. Remove battery

CORSAIR MEMORY, Inc. encourages customers to recycle used electronic hardware and rechargeable batteries in accordance with local laws and regulations.

• M/N (型號): TW 602030
• Capacity (電池容量): 3.7V, 300mAh, 1.11Wh
• Scan QR code for battery details

FCC ID: 2AAFM-RGP0184 (Mouse)
FCC ID: 2AAFM-RGP0185 (Receiver)
IC: 10954A-RGP0184 (Mouse)
IC: 10954A-RGP0185 (Receiver)

The power delivered by the charger must be between min 2.5 Watts required by the radio equipment, and max 10 Watts in order to achieve the maximum charging speed.

Recommend charging within temperatures 5°C-40°C (41°F-104°F) for best performance.

©2026 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.