By Dustin Sklavos
Free Standard Shipping
Hydro Series™ H110i 280mm Extreme Performance Liquid CPU Cooler
The Hydro Series™ H110i liquid CPU cooler has a 280mm radiator and dual SP140L PWM fans for the excellent heat dissipation you need for highly overclocked CPUs.
Compatible with CORSAIR iCUE
A 280mm radiator and dual SP140L PWM fans provide the excellent heat dissipation you need for highly overclocked CPUs
The Hydro Series H110i is an extreme performance, all-in-one liquid CPU cooler for cases with 280mm radiator mounts. The 280mm radiator and dual SP140L PWM fans provide the excellent heat dissipation you need for highly overclocked CPUs. It’s Corsair iCUE compatible, so you can customize cooling performance, monitor system temperature, and change the color of the RGB LED lighting.
The secret to fast, efficient cooling is maximizing cooling surface area. If your PC case has dual 140mm fan mounts spaced for a 280mm radiator, the H110i lets you take advantage of your case’s full cooling potential.
Advanced SP140L PWM fans
The included 140mm fans are custom-designed for high static pressure air delivery with minimum turbulence and noise. They’re PWM controlled, so you can customize the fan speed to find the optimal balance of cooling and noise.
Built-in CORSAIR iCUE
Attach the included CORSAIR iCUE cable to a USB header on your motherboard and download the free CORSAIR iCUE software to unlock even more power. You can customize cooling performance, monitor coolant and CPU temperatures, and change the color of the RGB LED lighting from the default white to match your system, or to change color based on temperature readings and other inputs.
High-performance CPU cooling made simple
The H110i is a closed loop design that comes pre-filled. It includes a modular, tool-free mounting bracket for faster installation, and it features improved coldplate and pump designs for highly tuned efficiency.
About Hydro Series Liquid CPU Coolers
Corsair Hydro Series CPU coolers give you the power of liquid cooling in a compact, easy-to-install package. They offer superior cooling for higher overclocking performance, without the complexity of traditional water cooling kits.
Intelligent Control. Unlimited Possibilities.
CORSAIR iCUE software brings your system to life with dynamic synchronized RGB lighting, customizable fan speeds to silence fans and advanced system monitoring.
- Radiator Dimensions: 140mm x 322mm x 27mm
- Fan Dimensions: 140mm x 25mm
- Fan Speed: 2100 RPM
- Fan Airflow: 113 CFM
- Noise Level: 43 dBA
- Fan Static Pressure: 3.99 mm-H2O
Socket 2011 Hydro Series CPU Cooler Mounting Guide
The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair
Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.
Hydro Series H80 and H100
Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.
Install all four of the standoffs as shown below.
After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.
Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.
Hydro Series H70 Core
The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.
The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.
Corsair Airflow Pro Installation Guide
We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�
By Dustin Sklavos