Hydro Series™ H110 280mm Extreme Performance Liquid CPU Cooler

$139.99 USD

ADD TO CART

SKU CW-9060014-WW
Hydro Series™ H110 280mm Extreme Performance Liquid CPU Cooler

$139.99 USD

The Hydro Series™ H110 280mm Liquid CPU Cooler provides quiet, efficient, extreme-performance CPU cooling for cases which support a 280mm radiator.

Extreme CPU cooling performance for 280mm radiator mounts

Hydro Series H110 is an all-in-one liquid CPU cooler that provides cooling that’s far superior to stock CPU air fans. Liquid cooling simply works better than air cooling, and the self-contained design of the H110 makes it easy for you to protect your valuable CPU.

Take advantage of your 280mm radiator mount

For efficient cooling, bigger is better – it’s simple physics. If your PC’s case can fit a 280mm radiator, Hydro Series H110 will give you better performance. The larger diameter fans provide better airflow with lower noise than most 120mm fans, and the 280mm radiator has more surface area for faster cooling.

LOW-RPM 140MM FANS

The blades of the included 140mms fan are larger than most 120mm fan blades, so they don’t need to spin as fast to deliver the same airflow, reducing noise without lowering performance.

Next-generation tubing

The low-evaporation, easy-bend tubing is guaranteed leak-free.

Advanced cold plate and manifold design

The cold plate uses copper for outstanding heat transfer, and the manifold is engineered for efficient flow.

Simple mounting bracket

The multi-platform mounting bracket easily adapts for Intel and AMD processors.

CONTENTS AND SPECIFICATIONS




Technical Specifications

  • Radiator Dimensions: 140mm x 312mm x 29mm
  • Fan Dimensions: 140mm x 25mm
  • Fan Speed: 1500 RPM
  • Fan airflow: 94 CFM
  • Noise level: 35 dBA
  • Fan static pressure: 1.64 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
YES
CORSAIR LINK compatibility
No
Radiator Dimensions
140mm x 312mm x 29mm
Fan Dimensions
140mm x 25mm
Fan Speed
1500 RPM
Number of Fans
2
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2
Lighting
None
Radiator Size
280mm
Fan Model
Standard
Fan airflow
94 CFM
Noise level
35 dBA
Fan static pressure
1.64 mm-H2O
LOAD MORE

By Pure Overclock

Posted on  January 28, 2013

Hydro Series H110 wins Madshrimps Performance award

If your case can house it, the Hydro 110, CORSAIR's new flagship, is the ultimate All in One Cooling kit tested till date by the Madshrimps crew.

Full Review!

By Hitech Legion

Posted on  January 31, 2013

Hydro Series H110 wins Gold award from OC3D!

“The big daddy gold award goes to the NZXT Kraken X60 and Corsair H110 in main part for the awesome temperatures. They are both a little rough around the edges and I think they both have areas in which they can make them better all round performers.”

Full Review!

By Hardware Heaven

Posted on  April 5, 2013

Hydro H110 wins Hardware Heaven Recommended award!

“So how did we feel about the cooler overall? Well on the performance front it is an impressive device. Class leading thermal performance is backed by low noise operation, which is always a great mix.”

Full Review!

By Overclock3D

Posted on  April 2, 2013

The Hydro H110 wins the Guru3D Top Pick award!

“The overall performance we think is terrific, and combined with the extremely low noise levels the H110 gets my approval real fast.”

“Leaving the bling out of this kit keeps it quite affordable, and as such comes recommended by Guru3D.com with a Top Pick award.”

“You know, we recently tested the NZXT Kraken series which in essence is a product close to the Corsair H110. Both originate from the very same ODM, albeit with different preferences and specs. The basis (radiator/cooling-block) however is from the same DNA. So it's not a surprise to see the two similar sized products perform very close to each other. My preference however goes to Corsair for the simple fact that is it the most silent product.”

Full Review!

Hydro H110 Spare Parts List


CP-8920128
Hydro Series H90/H110 140MM Single Replacement Fans
CW-8960012
Hydro Series H40/H50/H55/H70/H90/H110 AMD Mounting Bracket Kit
CW-8960013
Hydro Series H40/H50/H55/H70/H90/H110 Intel Mounting Bracket Kit

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to install CORSAIR AMD Bracket

How to find your lot code

 

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Headsets: The code is located on the earcup's arm.

Speakers: The code is located on the back of the subwoofer.

Case: The code is located on the back panel.

Cooling: The code is located on the radiator.

Flash: The code is located on the unit's packaging, near UPC barcode.

SSD: The code is located on the label on top of the SSD.

Mice: The code is located on the label taped next to the USB connector.

Keyboard: The code is located on the packaging near the UPC barcode.

Memory: The code is on the memory module's label.

PSU: The code is on the PSU label, next to the serial number.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.