SKU CP-9020045-EU
AX760 ATX Power Supply — 760 Watt 80 PLUS® PLATINUM Certified Fully-Modular PSU (EU Plug)

AX Series™ PSUs offer world-class performance, with 80 PLUS PLATINUM-certified efficiency, low noise, fully modular cable sets, and high reliability for extreme performance systems.

Power
Plug Type

Stable power delivery, silent operation, less energy consumption, and easier, better-looking builds

The AX760 offers ultra-clean power delivery for protecting your PC’s critical components. The efficient design uses less power and operates silently at low to medium loads, and the fully modular cable set helps make installation fast and easy, with better-looking results.

Less heat generation and lower operating costs

Excess heat means wasted energy. 80 PLUS Platinum certified efficiency means less waste.

Zero RPM mode for silent operation at low loads

The fan doesn’t even spin when your system is idle or doing basic work like surfing the web or running office applications.

Easy installation

The fully modular cable set lets you use only the cables you need. You can install the AX Series first and then add cables one-by-one without having to deal with the dreaded “cable octopus."

Stable, reliable power output

High-quality components and careful design help ensure maximum protection for your PC’s components.

Flexible and compatible

AX Series comes with long cables for large cases, and lots of connectors for just about any hardware configuration.

Fully modular connection system with low-profile cables

All of the power cables have connectors on both ends, with nothing hard-wired to the PSU. This makes for easier installs (you don’t need to deal with an octopus of cables while you’re putting in the power supply), and you can add cables one-by-one, using only the cables you need. The result is a cleaner-looking build, with better airflow.

Clean, stable power delivery

High-quality capacitors, a dedicated single +12V rail and a PF value of 0.99 give you reliable power output with extremely low ripple and noise. Over-voltage, under-voltage, over-current, and short circuit protection provide maximum safety for your critical system components. And, AX860 is engineered to meet maximum power output at a server-grade 50° C temperature rating.

Wide compatibility

The AX Series conforms to ATX12V v2.31 and EPS 2.92 standards, and is backward compatible with the ATX12V 2.2 and ATX12V 2.01 standards. It accepts universal AC input from 90V - 264V. Safety approvals include cTUVus, CE, CB, FCC Class B, TÜV, CCC, and C-tick

CONTENTS AND SPECIFICATIONS



  • Package Contents

  • AX760 power supply
  • Modular cable pack
  • Accessory bag with mounting hardware, cable ties, and case badge
  • Installation Guide

  • Compatibility

  • ATX12V v2.4 and EPS 2.92 standards

ATX Connector
1
Ability to toggle singlemultiple 12V rails
No
ATX12V Version
v2.4
Continuous output rated temperature C
50°C
Continuous power W
760 Watts
Corsair Link Support
No
Fan bearing technology
Dual Ball Bearing
Fan size mm
120mm
MTBF hours
100,000 hours
Multi-GPU ready
YES
Power
760 Watts
Warranty
Seven years
80 PLUS Efficiency
Platinum
PSU Form Factor
ATX
Zero RPM Mode
Yes
Cable Type
Low-Profile, All Black
C-Link Ready
No
Dimensions
150mm x 86mm x 160mm
EPS Connector
2
Floppy Connector
2
Modular
Fully
PCI-E Connector
6
Plug Type
EU
SATA Connector
12

By kitguru.net

Posted on  November 20, 2012

KitGuru gives non-digital AX760 and AX860 the Must Have award.

“There are certainly cheaper options on the market, but in this case you certainly get what you pay for.” “The pure modular design will prove popular with a wide audience of case modders who want to fine tune their cabling for ultimate appearance. The high grade 120mm Sanyo Denki fan is very quiet, even when dealing with a very high, active load.” “These are excellent power supplies, but to be perfectly honest we expect this now from Corsair, their overall standards in a wide cross section of sectors have been without reproach this year. Both AX760 and AX860 ship with a seven year warranty and they are clearly confident that these units are built to last.”

Full Review!

By TweakTown

Posted on  November 30, 2012

AX760 wins Editor's Choice at TechPowerUP!

“To sum up, the AX760 is a no brainer if you don't want many bells and whistles (aka digital control), but do want the best that money can buy in this category. You will invest a serious amount of money, that is for sure, but you will enjoy Corsair's support for seven years while your system is being fed by ultra-clean and stable DC outputs. As I stated many times in the past, the purchase of a PSU is an investment, so better take it very seriously. A good PSU will accompany you for many many years and will actually protect your system in case something goes horribly wrong.”

Full Review!

By Bit-Tech

Posted on  July 12, 2012

AX760 wins Golden Award from Hardware Secrets

"Although not the cheapest power supply around, its price is on par with what it has to offer. Its price is similar to competing 750 W power supplies with the 80 Plus Platinum certification, however competing products don’t have the same performance level, making the Corsair AX760 a good buy if you are looking for a flawless power supply."

Full Review!

By HardwareHeaven

Posted on  January 23, 2013

AX760 wins Best Hardware Award from Guru3D

“The new AX series PSUs stand out from many competitors by a good margin. But sure, it's a crowded market with quality and efficiency levels being bumped up with each year that passes. But high quality, highly efficient, highly stable and inaudible are the keywords here. This AX760 PSU is impressive and Corsair definitely deserves our best hardware award, once again.”

Full Review!

By Guru3D

Posted on  November 28, 2012

Corsair AX760 wins Hexus.net 'Performance Award'

“...if you want a supply that's solid in every area and backed by a seven-year warranty, the Corsair AX760 really needs to be on a rather short shortlist.”

Full Review!

Understanding the Corsair AXi Series Digital Power Supplies

Replacing commonly used ICs with a digital signal processor in the Corsair AXi Series PSUs has many benefits. Today, I'm going to explain the functions of the components that are replaced within the Corsair Digital power supplies and how these changes benefit the end user.

Understanding the Corsair AXi Series Digital Power Supplies

The parts of the Corsair AXi Digital Power Supply that makes them unique when compared to other desktop power supplies is the absence of a PFC/PWM controller IC (integrated circuit) on the power supply's primary side and a supervisor IC on the power supply's secondary side. Both of these parts have been replaced with DSP, which stands for "Digital Signal Processor".

AXi PSUs still use what's called a "resonant mode" topology like a lot of modern day super-efficient power supplies, but typically in other resonant mode PSUs a PWM controller IC changes the power supply's switching frequency based on an analog signal derived from the load measured at the transformer. This makes the power supply more efficient at a wider range of loads compared to other power supply topologies, but doing this alone can affect ripple and noise and voltage regulation.

Understanding the Corsair AXi Series Digital Power Supplies

The resonant mode controller, shown above, is just about the only IC you'll find in an AXi power supply that you may also see in other high end power supplies.

The supervisor IC is the heart of the power supply's safety functions. Functions like OCP (over current protection, which is protection from any one output drawing too much current), OPP (over-power protection, which prevents overloading), OVP (over-voltage protection, which measures if voltage goes too high), UVP (under-voltage protection), and SCP (short circuit protection). Temperatures are also measured within the power supply and this is reported to the IC's OTP (over-temperature protection). If any value programmed into the IC is exceeded, the IC is instructed to shut down the power supply.

Understanding the Corsair AXi Series Digital Power Supplies
Above is a supervisor IC found in a Corsair GS800 power supply.

In an effort to improve voltage regulation (drops in voltage as loads increase), the information concerning the power supply's output voltage is sent back to the PWM controller via an analog signal. This information moves relatively slow when compared to the ever-varying loads of your typical PC, so voltage regulation is still not as good as it can be.

Understanding the Corsair AXi Series Digital Power Supplies

Above is the PWM/PFC controller from a Corsair GS800 power supply.

AXi power supplies improve on this analog system by using the DSP. Like a supervisor IC, the DSP measures all of the pertinent information on the secondary side, as well as taking the same measurements on the primary side as your typical PFC/PWM controller IC. This information is also analyzed by the DSP's microprocessor and adjustments are made to the different components of the power supply in an effort to improve efficiency while maintaining very tight voltage regulation and minimizing ripple and noise. Because the signals are digital instead of analog and an inherently homogeneous DSP system is used to analyze the information as opposed to multiple ICs, adjustments can be made much faster than can be made with the typical set of ICs found in other desktop power supplies. And since the DSP is analyzing all of the same outputs (and then some!), the DSP still has the ability to act as a supervisor IC and shut down the power supply if any values exceed what is considered "safe" for the power supply or your computer.

Understanding the Corsair AXi Series Digital Power Supplies
Here is an AX860i removed from the housing. This one PCB has all of the chips that are part of the DSP system.

Let's zoom in on some of the chips on this PCB. Shall we?

Understanding the Corsair AXi Series Digital Power Supplies

Above is a picture of the Freescale Digital Signal Controller found in the AXi series of power supplies. This chip handles what goes on on the primary side of the power supply. 

This guy is responsible for the PFC (power factor correction) control, the PMW (pulse width modulation) control, monitoring of the AC input's voltage, current and wattage and logical on/off control, like shutting down for inrush, brownouts, etc.

Understanding the Corsair AXi Series Digital Power Supplies

Above we see two more ICs found inside an AXi series power supply. The chip on the bottom is the main MCU, or "MCU I". The chip on the top is a USB MCU, or "MCU II". These guys handle what goes on on the secondary side of the power supply.

The MCU I does what we call "housekeeping". It has a lot of the same functions as a supervisor IC in an analog controlled PSU. Things like OCP, OPP, OVP, etc. are all monitored by this chip. This chip also handles the PMBus (power management bus) and thermal monitoring and fan control. The MCU I also monitors the power on (soft on/off) and power good signals coming from the motherboard. On top of all of this, the MCU I also monitors the DC output for voltage drop, ripple and noise and communicates back to the DSP to address any issues that may come up.

The MCU II is the chip that allows the user to turn on/off the single/multiple +12V rail capability of an AXi PSU via the Corsair Link software. The self test function is also controlled by this chip.

Since the DSP accumulates all of this information about the power supply, and does so in real time, we can deliver it to the end user via our Corsair Link software. Power supplies have attempted to deliver similar information about the power supply to the end user in the past; either via software or displayed on a 5.25" bay LCD. But since the information about the power supply in these older units was accumulated via the PFC/PWM controller and supervisor IC, the information had to be converted to a digital signal before being displayed. This adds a good deal of cost and prevents the information from being delivered as close to real time as possible.

Understanding the Corsair AXi Series Digital Power Supplies



Using Corsair Link, we can monitor everything from AC input voltage, output wattage... even the current being delivered to each graphics card's PCIe controller! Above you can see I've enabled OCP on each modular connector (essentially making the AXi a multiple +12V rail power supply) and turned all of the limits down to 20A.

We can also keep track of the temperature inside the power supply and how fast the fan is spinning:

Understanding the Corsair AXi Series Digital Power Supplies

All in all, AXi Digital Power Supplies are so much more than your average desktop PSU on so many levels. By utilizing a DSP, Corsair offers improved efficiency while maintaining stable voltage output and minimizing unwanted ripple and noise. And because all of this information is maintained in a digital format, and output to the Corsair Link software interface is practically seamless!

Using Link with a Corsair AXi Digital Power Supply

The Corsair AXi Series PSUs have a lot of premium features. They use a digital signal processor for better performance, they're fully modular, and have a zero RPM fan mode at low loads. But one of the coolest things about the AXi power supplies, is their compatibility with the new Corsair Link software. Today, we take a look at the Corsair Link 2 software, or just "Link" for short, and more specifically how it gives you the ability to monitor AC input, DC output, the temperature and the fan speed of an AXi power supply.

The first thing I want to do is open up the "Graph" tab and set what I want to monitor in the "Config Panel" of this tab...

Using Link with a Corsair AXi Digital Power Supply

Above, you can see that I've checked boxes asking to have my two graphics cards' temperatures and fans graphed, as well as my CPU's temperature, the temperature of my AX860i power supply, as well as the AX860i's fan speed. I'm also monitoring the temperature of the coolant in the Hydro Series H100 that is cooling the CPU and the RPMs of the two fans cooling the H100's radiator.

Using Link with a Corsair AXi Digital Power Supply

While the system is idle, we can see that temperatures are relatively low. The AX860i is just barely over room temperature and therefore, the fan is not spinning.



Over on the "Power" tab, we see that the AX860i is only producing 107.3W as I sit here watching the Link software. It's pulling 117.8W from the wall, so our efficiency is 91%.

On this tab, we can also monitor our voltages, including the voltage of our AC mains, as well as current for each of our +12V outputs.

There are also check boxes that allow you to turn OCP on for the 8-pin +12V outputs (labeled "PCIe") on the power supply. OCP stands for "over current protection" and will shut down the power supply if too much current is delivered on any of these outputs.

Finally, we see the AX860i's temperature and the fan RPM on this tab. This is the same information we saw on the "Graph" tab, but in a different format. The fan is still not spinning because the temperatures are still low, but if we wanted to increase the airflow within our chassis just a bit, we can manually turn the fan speed up.

We start on the "System" tab...



On this tab, we can see everything that Corsair Link 2 monitors, but if we click on the "AX860i Fan" icon on the left, a configuration panel opens up on the right. By default, we can see the fan mode is set to "quiet" which means the fan isn't going to spin at low loads. Changing this is easy...

Using Link with a Corsair AXi Digital Power Supply

The lowest setting is 40%, which equates to about 784 RPM. I can keep it like this and still not hear the fan. And the fan will still ramp up even faster automatically if needed. Let's turn it up even more to find out where I can start hearing the fan...



At 76%, the fan is spinning 1508 RPM. I can definitely hear that now. Well, that's enough of that. Let's put the PSU fan back into "quiet" mode, fire up Prime95 and Furmark and see what kind of power we produce and let the fan spin up all on its own...

Using Link with a Corsair AXi Digital Power Supply

Almost immediately, the temperatures of the CPU and graphics cards increase. Under this load, we start to see the power supply fan ramp up as well.

Using Link with a Corsair AXi Digital Power Supply

After some time under load, we see our temperatures level out, an increase in the graphics cards' fan's RPMs and the PSU's fan leveling off just over 500 RPM.

Using Link with a Corsair AXi Digital Power Supply

When we switch back over to the "Power" tab, we can see that our load has increased to 473.4W. We're now pulling 502.9W from the wall and our efficiency is increased to 94%. We can see that the amperage delivered on all of our +12V connectors has increased, the AX860i's temperature has increased very slightly, from 26.5 to 28.8°C, and the fan is now spinning at 556 RPM.



Of course, when you're gaming you're probably not going to be able to watch your load, temperatures and fan speeds while you're playing. For this reason, Corsair Link allows you to log whatever information you'd like to keep track of in a CSV file. Simply check the boxes of the components you want to monitor, browse to where you want to save the file and give the file a name and click "start logging".