1. GETTING TO KNOW YOUR KEYBOARD
  2. TECHNICAL SPECIFICATIONS
  3. SETTING UP YOUR KEYBOARD
  4. HARDWARE OVERVIEW
  5. ONBOARD LIGHTING
  6. FACTORY RESET
  7. COPYRIGHT / LEGAL INFORMATION

KILAVUZ | HIZLI BAŞLANGIÇ KILAVUZU

CLIPPER CORE 100

Mechanical Gaming Keyboard

GETTING TO KNOW YOUR KEYBOARD

  1. VOLUME DOWN BUTTON
  2. LAUNCH THE BUILT-IN MEDIA PLAYER BUTTON
  3. PLAY/PAUSE BUTTON
  4. VOLUME UP BUTTON
  5. USB KEYBOARD CONNECTOR

TECHNICAL SPECIFICATIONS

FEATURE DESCRIPTION
Form Factor Full size
Top cover Aluminum plate
Bottom Plastic
Sound Dampening Silent case and spacebar foam
Colorway Black
Keycaps ABS Double shot
Backlighting Rainbow RGB (Row RGB)
Keyswitches Pre-lubed linear red keyswitches
Wired Connectivity USB 2.0 Type-A
Matrix Full key rollover (NKRO) with 100% anti-ghosting
Polling Rate 1,000Hz
Media Control FN key/Hotkey
Volume Control FN key/Hotkey
Adjustable Height Yes
Plug and Play Operation Yes
Cable Fixed cable
Dimensions 436.5 (L) x 127.5 (W) x 35.4(H) mm
Weight 786.7g
Warranty Two years – Local country regulations are applicable

SETTING UP YOUR KEYBOARD

Connecting the keyboard via USB cable to an available USB Type-A port on a compatible device including:

Windows® PC

Apple Mac® (It is compatible with macOS. However, firmware updates are not supported on macOS and must be performed on a Windows PC.)

 

HARDWARE OVERVIEW

Function Shortcuts

Shortcut Function Description
FN + 1 Play / pause Toggles playing and pausing media
FN + 2 Stop playback Stops currently playing media
FN + 3 Last track Skips back to last played track in playlist
FN + 4 Next track Skips forward to next track in playlist
FN + 5 Launch default media app  
FN + 6 Mute/Unmute  
FN + 7 Volume down 2%  
FN + 8 Volume up 2%  
FN + -_ Decrease brightness 20% per trigger (5 scales total)
FN + =+ Increase brightness 20% per trigger (5 scales total)
FN + F12 Record custom lighting pattern for F1-F5

For F1-F5 static lighting pattern customization

1. Press FN + F12. The LEDs on F1–F5 will flash green, indicating that recording mode is activated.

2. Press one of the F1–F5 keys to select which lighting graphic you want to customize.

3. Once selected, all keyboard lighting will turn off, indicating that customization mode has started.

4. Press the keys you would like to illuminate in the default static lighting color to create your custom lighting pattern.

5. Press FN + F12 again to save and exit recording mode.

6. The selected F1–F5 slot will now display your newly recorded lighting pattern, replacing the previous one.

 How to exit this recording:

  • Press FN + F6-F11 to directly enter six dynamic lighting effects
  • Press FN+ Pause to perform factory reset
FN + PgUp Increase lighting effect Speed 20% per trigger (5 scales total)
FN + PgDn Reduce lighting effect Speed 20% per trigger (5 scales total)
FN + Left Arrow Rotate lighting left

Only certain modes are supported under the following two dynamic lighting effects:

FN + F7

  • Mode 1: Wave
  • Mode 2: Ripple
  • Mode 3: Flow

FN + F8

Mode 2: Flowing Light
FN + Right Arrow Rotate lighting right
FN + Pause Factory Reset

Press and hold FN + Pause for three seconds until the overall lighting flashes for around one second.

This confirms the keyboard has been restored to factory settings.

ONBOARD LIGHTING

Shortcut Lighting Effect Remark
FN + F1-F5 Five static lighting patterns

The keyboard supports five static lighting patterns.

Use FN + F1 to F5 to switch between the five different static lighting patterns.
FN + F6-F11 Six dynamic lighting effects

Switch dynamic lighting effects:

The keyboard includes six dynamic lighting effect categories, accessible via FN + F6 to FN + F11.

  • Press FN + F6–F11 to select a lighting effect category.
  • Each category includes four different modes.
  • Press the same FN + Fx key repeatedly to cycle through its four modes.

FN + F6

  • Mode 1: Stars Light Up
  • Mode 2: Single-Key Ripple
  • Mode 3: Type Lighting
  • Mode 4: Type Fade

FN + F7

  • Mode 1: Wave
  • Mode 2: Ripple
  • Mode 3: Flow
  • Mode 4: Color Cycle

FN + F8

  • Mode 1: Key Ripple
  • Mode 2: Flowing Light
  • Mode 3: Continuous Flow
  • Mode 4: Diagonal Gradient

FN + F9

  • Mode 1: Spiral
  • Mode 2: Loop
  • Mode 3: Color Spin
  • Mode 4: Moving Trail

FN + F10

  • Mode 1: Breathing
  • Mode 2: Twinkle
  • Mode 3: Sine wave
  • Mode 4: Zone Breathing

FN + F11

  • Mode 1: Static
  • Mode 2: Waterfall
  • Mode 3: Running Light
  • Mode 4: Type Sparkle

FACTORY RESET

Press and hold FN + Pause for three seconds until the overall lighting flashes for around one second.

This confirms the keyboard has been restored to factory settings.

© 2026 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.

2 YEARS WARRANTY