专为 280mm 散热器托架打造的出色 CPU 散热性能
Hydro 系列 H110 是一款一体化液体 CPU 冷却器，能提供远超现有 CPU 风扇的冷却性能。液体冷却的运行优于空气冷却，H110 的独立式设计可方便您保护重要的 CPU。
利用您的 280mm 散热器
为实现高效的冷却，越大越好 – 这是简单的物理原理。如果您的 PC 机箱适合 280mm 散热器，Hydro 系列 H110 将为您带来更优的性能。与大多数 120mm 风扇相比，大直径风扇具有更好的气流量和更低的噪声，280mm 散热器具有更大的表面积，从而带来更快速的冷却。
低 RPM 140mm 风扇
随附的 140mm 风扇的叶片大于大多数 120mm 风扇叶片，因此，其无需快速旋转也能提供相同的气流量，降低了噪音且未损坏性能。
多平台安装支架易于适应 Intel® 和 AMD™ 处理器。
- Radiator Dimensions: 140mm x 312mm x 29mm
- Fan Dimensions: 140mm x 25mm
- Fan Speed: 1500 RPM
- Fan Airflow: 94 CFM
- Noise Level: 35 dBA
- Fan Static Pressure: 1.64 mm-H2O
Hydro H110 Spare Parts List
Hydro Series H90/H110 140MM Single Replacement Fans
Hydro Series H40/H50/H55/H70/H90/H110 AMD Mounting Bracket Kit
Hydro Series H40/H50/H55/H70/H90/H110 Intel Mounting Bracket Kit
Socket 2011 Hydro Series CPU Cooler Mounting Guide
The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair
Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.
Hydro Series H80 and H100
Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.
Install all four of the standoffs as shown below.
After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.
Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.
Hydro Series H70 Core
The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.
The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.
How to install CORSAIR AMD Bracket
Corsair Airflow Pro Installation Guide
We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�
Hydro Series H110 wins Madshrimps Performance award
If your case can house it, the Hydro 110, CORSAIR's new flagship, is the ultimate All in One Cooling kit tested till date by the Madshrimps crew.完整评论
Hydro Series H110 wins Gold award from OC3D!
“The big daddy gold award goes to the NZXT Kraken X60 and Corsair H110 in main part for the awesome temperatures. They are both a little rough around the edges and I think they both have areas in which they can make them better all round performers.”完整评论
Hydro H110 wins Hardware Heaven Recommended award!
“So how did we feel about the cooler overall? Well on the performance front it is an impressive device. Class leading thermal performance is backed by low noise operation, which is always a great mix.”完整评论
The Hydro H110 wins the Guru3D Top Pick award!
“The overall performance we think is terrific, and combined with the extremely low noise levels the H110 gets my approval real fast.”
“Leaving the bling out of this kit keeps it quite affordable, and as such comes recommended by Guru3D.com with a Top Pick award.”
“You know, we recently tested the NZXT Kraken series which in essence is a product close to the Corsair H110. Both originate from the very same ODM, albeit with different preferences and specs. The basis (radiator/cooling-block) however is from the same DNA. So it's not a surprise to see the two similar sized products perform very close to each other. My preference however goes to Corsair for the simple fact that is it the most silent product.”完整评论