专为 140mm 风扇托架打造的低噪音高性能 CPU 散热器
Hydro Series H90 是一款 140mm 一体化液体 CPU 冷却器，能提供比其它高端液体冷却器更好的冷却效果和更低的噪音。液体冷却的运行优于空气冷却，H90 的独立式设计可方便您保护重要的 CPU。
利用您的 140mm 风扇安装位置
为实现高效的冷却，越大越好 – 这是简单的物理原理。如果您的 PC 的机箱可容纳 140mm 的风扇，Hydro 系列 H90 将提供更优的性能。与大多数 120mm 风扇相比，大直径风扇具有更好的气流量和更低的噪声，140mm 散热器具有更大的表面积，从而带来更快速的冷却。
多平台安装支架易于适应 Intel® 和 AMD™ 处理器。
- Intel 115x, Intel 2011/2066
- AMD AM3/AM2
- Radiator Dimensions: 140mm x 170mm x 27mm
- Fan Dimensions: 120mm x 25mm
- Fan Speed: 1500 RPM
- Fan Airflow: 94 CFM
- Noise Level: 35 dBA
- Fan Static Pressure: 1.64 mm-H2O
Hydro H90 Spare Parts List
Hydro Series H90/H110 140MM Single Replacement Fans
Hydro Series H40/H50/H55/H70/H90/H110 AMD Mounting Bracket Kit
Hydro Series H40/H50/H55/H70/H90/H110 Intel Mounting Bracket Kit
Socket 2011 Hydro Series CPU Cooler Mounting Guide
The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair
Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.
Hydro Series H80 and H100
Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.
Install all four of the standoffs as shown below.
After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.
Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.
Hydro Series H70 Core
The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.
The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.
Corsair Airflow Pro Installation Guide
We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�
Hydro H90 wins TechPowerUP! Highly Recommended award
“All in all, the Corsair Hydro Series H90 is a fantastic cooler that looks good and performs great. It even does so with the lowest noise output of all coolers tested to date. If a user needs good cooling while overclocking and does not wish to be bothered by noise, the Corsair Hydro Series H90 is a fantastic choice.”完整评论
H90 wins Guru3D Top Pick award!
“The overall performance we think is really fine, and combined with the low noise levels the H90 easily gets our approval.”完整评论