FRAME
4000D RS ARGB
模块化中塔式PC机箱
FRAME 4000D RS ARGB模块化中塔式PC机箱
CORSAIR FRAME 4000D RS ARGB是一款采用全模块化配置，且空间充足的中塔式PC机箱，具有InfiniRail风扇安装系统，同时兼容于反向连接器主板。
包含
包含
- 完全模块化设计，个性化能力更上一层楼
- InfiniRail风扇安装系统更方便进行组装
- 随附三个RS120 ARGB高性能风扇
- 支持双 360mm 散热器
- GPU防下垂稳定臂
- 兼容包括ASUS BTF、MSI PROJECT ZERO和GIGABYTE PROJECT STEALTH在内的反向连接器主板
Awards
SKU: CC-9011296-WW
- 概览
- 技术规格
- 下载
- 指南
- 常见问题
FRAME
专为上佳表现打造
50 SERIES GPU现已上市
用自己的方式打造
模块化为您带来无限可能
非同凡响的FRAME模块化机箱系统重新定义了个性化。想将主板托盘升级为铝坯料吗？想更换前置I/O面板以获得更多USB端口吗？您的要求现在就能得到满足。
这款机箱随着您的需求而变化，几乎可以为您的升级和改造需求提供近乎无限种选择。
这款机箱随着您的需求而变化，几乎可以为您的升级和改造需求提供近乎无限种选择。
气流有针对性的风扇
INFINIRAIL风扇安装系统
这种钢制多点安装系统为前置风扇和顶置风扇配置提供了无与伦比的灵活性。轻松滑动的导轨可以让您地将不超过200mm（顶部为140mm）的风扇安装到您想要安装的准确位置，确保有针对性的气流，不受固定安装点的限制。
更出色的散热性能
空气流量提升12%*
全新的3D Y型钢制前面板专为实现尽可能大的气流和尽可能小的风阻而设计，可确保凉爽空气的流通路径上没有阻碍，增强整体冷却效果。
*与之前的 4000D Airflow 前面板相比
*与之前的 4000D Airflow 前面板相比
安装到位就能带来不凡冷却效果
支持两个360mm散热器
在前部、顶部和侧边设有三个360mm散热器的专用安装位置，可提升冷却效果。您可以同时安装多达10个120mm的风扇，确保持续吸入冷空气，并高效的排出热空气。
空气导流套件
随附三个RS120 ARGB风扇
可通过菊花链连接的RS120 ARGB PWM风扇，能够带来出色的冷却效果，无需单独的控制器。
通过兼容主板上的一个4引脚PWM连接器和一个+5V ARGB连接器即可控制。
通过兼容主板上的一个4引脚PWM连接器和一个+5V ARGB连接器即可控制。
不会过时。
深入了解这款FRAME机箱
通过仔细的线缆布线，确保组装的设备具有出色的气流通道，能够为新款主板和显卡提供支持。
线缆全部隐藏
与Asus、MSI和Gigabyte的反向连接器主板完全兼容，实现没有阻碍的空气流通路径，打造出井然有序的组装设备内部构造。
不会出现显卡下垂的情况
每个CORSAIR FRAME 4000D都配备了一个GPU防下垂稳定支臂，以保持GPU的稳定，因此您永远不必担心损坏PCIe插槽。
线缆护罩
用线缆护罩将未使用和过长的电缆挡住，以保持内部井然有序。
广泛的冷却灵活性
Customize your cooling setup with room for up to 12x 120mm fans, plus versatile radiator mounting options including up to dual 360mm radiators.
FRAME 4000D拥有充足的空间来容纳高性能组件，同时也有足够的空间来为您组装的设备散热。
两年保修
强力支持
我们屡获殊荣的服务可让您无忧畅享装备。
1
2
3
4
时尚的前面板I/O
接口触手可及，包含1个USB 3.2 Gen 2 Type-C端口、2个USB 3.2 Gen 1 Type-A端口以及一个音频/麦克风组合插孔。
1
Power Button
2
Headphone / Mic Combo Jack
3
2x USB 3.2 Gen 1 Type-A Ports
4
USB 3.2 Gen 2 Type-C Port
Overview
Key Features
-
InfiniRail™ Fan Mounting System
The InfiniRail system eliminates fixed mounting holes, letting you slide fans along a steel rail to position them exactly where your build needs airflow most. Unlike traditional cases where fan placement is locked to specific holes, this gives you millimeter-level control to align fans with GPU hotspots, RAM clearance gaps, or radiator inlets; particularly useful when working around tall CPU coolers or custom loop components. -
Dual 360mm Radiator Support
Install up to two 360mm radiators at once across three available locations: front, top, or side panel. This configuration supports aggressive liquid cooling setups for overclocked CPUs and GPUs simultaneously, or enables enthusiast custom liquid cooling loops for extreme thermal management. The case accommodates up to 13 120mm fans total, ensuring both radiators receive adequate intake while maintaining exhaust capacity. -
Reverse Connector Motherboard Compatibility
Compatible with the latest reverse-connector motherboards that relocate all power and data cables to the back side of the board. When paired with these motherboards, the visible side of your build shows zero cables; no 24-pin ATX connector, no GPU power cables (ASUS BTF 2.0+), no front panel wiring. All connections route behind the motherboard tray, creating a completely a cable-free aesthetic and unobstructed view of your components. -
3D Y-Pattern Front Panel (12% Airflow Improvement)
The redesigned 3D Y-pattern front panel uses geometric steel cutouts to maximize open surface area while maintaining structural rigidity. Compared to the previous 4000D Airflow, this design reduces intake restriction by 12%, allowing front-mounted fans and radiators to draw cooler ambient air with less resistance. The result is lower fan speeds needed to achieve target temperatures, reducing noise while improving thermal performance for GPU and CPU-intensive workloads.
Use Cases
-
Quiet High-Performance Builds:
This case is ideal for users who need substantial cooling capacity but want to minimize noise. The high radiator support (dual 360mm capability) allows for large radiator surface area, which dissipates heat at lower fan speeds. The 3D Y-pattern front panel's reduced restriction means intake fans operate at lower RPM to achieve equivalent airflow. Combined with the included RS120 ARGB fans (which are PWM-controllable), builders can sufficiently cool high-performance components (overclocked CPUs, high-TDP GPUs) while keeping the system whisper-quiet during light loads and reasonably quiet under full load. -
Custom Liquid Cooling Enthusiast Projects
The three radiator mounting positions (front, top, side) with simultaneous dual 360mm support make this case particularly well-suited for custom water cooling loops. Enthusiasts can dedicate a 360mm radiator to CPU cooling and another to GPU cooling, or run a single loop with dual radiators for maximum thermal headroom during benchmark runs and extended gaming sessions. The InfiniRail system allows precise radiator fan positioning to optimize inlet/outlet alignment with loop tubing, and the spacious interior (430mm GPU clearance) accommodates reservoirs, pump/res combos, and complex tubing runs without component interference. -
Reverse-Connector "Zero Cable" Aesthetic Builds:
For users prioritizing visual presentation, pairing this case with a reverse-connector motherboard (ASUS BTF, MSI PROJECT ZERO, or GIGABYTE STEALTH) creates a completely cable-free view through the tempered glass panel. All power delivery and data cables route behind the motherboard tray, leaving only the visible components (GPU, RAM, CPU cooler, and motherboard) on display. This is particularly appealing for RGB showcase builds, streaming setups where the PC is on camera, or users who simply want a cleaner aesthetic without the tedious work of custom cable extensions and extreme cable management. -
First-Build-Friendly Spacious Assembly:
The modular design and generous internal dimensions make this case accessible for first-time builders. The InfiniRail system simplifies fan installation by eliminating alignment struggles with fixed screw holes; just slide the fan along the rail and tighten. The 430mm GPU clearance and 170mm CPU cooler height provide ample room to work without constantly checking clearances. The included GPU anti-sag bracket prevents beginner mistakes that could damage PCIe slots. Three pre-installed RS120 ARGB fans mean the case works out-of-box without requiring additional cooling purchases or complicated fan hub wiring.
技术规格
| Case Supported | Mini-ITX | MicroATX | ATX | E-ATX (305mm x 277mm) |
|---|---|
| Case Height | 486mm |
| Case Length | 490mm |
| Case Width | 239mm |
| Material | Steel, Tempered Glass, 3D-Y Airflow Steel, Plastic |
| Motherboard Support | Mini-ITX, Micro-ATX, ATX, E-ATX (305mm x 277mm) |
| Color | BLACK |
| Case Size | Mid-Tower |
| Radiator Compatibility | 120mm, 140mm, 240mm, 280mm, 360mm |
| Compatible Liquid Coolers | H60, H100, H115, H150, NAUTILUS, TITAN |
| Case Warranty | 2 Year |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 4 |
| Maximum CPU Cooler Height | 170mm |
| Maximum PSU Length | 220mm |
| Case Front IO | (1x) USB 3.2 Gen 2 Type-C, (2x) USB 3.2 Gen 1 Type-A, (1x) Audio in/out |
| Maximum GPU Length | 430mm |
| Weight | 10.38kg |
| Case Expansion Slots | 7 Horizontal or 3 Vertical |
| Case Power Supply | ATX |
| Radiator Support - Top | 360mm, 280mm, 240mm |
|---|---|
| Radiator Support - Front | 360mm, 280mm, 240mm |
| Radiator Support - Bottom | None |
| Radiator Support - Side | 360mm, 280mm, 240mm |
| Radiator Support - Rear | 140mm, 120mm |
| Fan Support - Top | 3x 120mm, 2x 140mm |
| Fan Support - Front | 3x 120mm, 2x 140mm, 2x 200mm |
| Fan Support - Bottom | 2x 120mm |
| Fan Support - Side | 3x 120mm, 2x 140mm |
| Fan Support - Rear | 1x 120mm, 1x 140mm |
| Front IO Motherboard Connections | 1x HD Audio; 1x USB 3.2 Gen1; 1x USB-3.2 Gen2 Type-E; 1x F_PANEL |
| Reverse Connector Motherboard Support | Yes |
| Included Fans | RS ARGB Series |
| Dust Filtration | Yes |
| Cable Routing Space | 37mm |
| RapidRoute Included | No |
| Left Side Panel | Tempered Glass |
| Right Side Panel | Steel |
| Vertical Mount Support | Supported (Riser Card Sold Separately) |